Anubis Class VII Light Cruiser

design by Jim Botaitis

NOTES:
The Anubis class of light cruiser was created following the near total destruction of the Hermes class scout USS Anubis. The hulk of the Anubis was eventually towed to Rigel IV with initial intentions for the damaged vessel to be scrapped. However, to honor the incredible varletry of the crew of the Anubis, the decision was made to incorporate many of the operational components of the Anubis into a partially (and as yet unnamed) Surya hull under construction at the Merimar Ship Work fleet yard. The primary bridge, main computer core, sections of the dorsal hull and warp nacelle were all grafted onto the partially finished hull resulting in a new class of ship.

Initially, the Anubis class was intended to be heavily armed and immediately returned to front-line duty. However, with much of the fleet continuing in military engagements along the Klingon border, designers felts that a cruiser design, rather than a single engine frigate or destroyer, would allow Starfleet to reassign other heavy cruisers to the battlefield and continue the much needed exploration and mapping of space. The larger primary hull of the Anubis class would allow for improved layout and support of the vessels’ scientific capabilities. A significantly larger shuttle capability was also incorporated and in 2252, the Anubis was relaunched.

The needs of the many unfortunately forced the Anubis and her sister ships back to the battlefield where they did not fare well in combat. Their reduced armament allowed for quick construction and repair times, but forced the Anubis class to operate as a support craft and in concert with other forward destroyers and frigates. The ease of production meant that the Anubis would continue being produced throughout the war with a peak war-time production of 4 per year. The eventual conclusion of the war ended production of the class in 2258 with only 16 hulls fielded.

However, the simple design and layout meant that the Anubis class was easy to upgrade, and in 2260, the Mk II was introduced. Removing the less efficient laser system and replacing them with the far more efficient phaser system proved to be an extremely simple alteration. An enlarged computer was also installed, giving the ship superior data analysis capabilities. The design also allowed for easy swap out of the primary shield generators, vastly improving the ship’s defensive capability. The Mk II Anubis would help survey and catalogue a wide area of unexplored space, following up on a number of scouting missions.

The design would be updated on final time in 2265. Improved phasers and an enlarged impulse drive significantly enhanced the ship’s capabilities. The Mk III would continue in general service until 2276, when the last Anubis was retired from service.

Of the 16 vessels fielded, 9 Mk IIIs were converted to other vessels. 2 Mk Is, 1 Mk II and 1 Mk III are listed as missing. 1 Mk I and 2 Mk IIs were scrapped. The Anubis was built at the Rigel IV, Catulla and Proxima Centauri ship yards.
 

Construction Data:
Model Number — Mk I Mk II Mk III
Ship Class — VII VII VII
Date Entering Service — 2252 2260 2265
Number Constructed — 16 Refit Refit
Hull Data:
Superstructure Points — 20 20 20
Damage Chart — C C C
Size:
Length — 248.3 m 248.3 m 248.3 m
Width — 127.1 m 127.1 m 127.1 m
Height — 55.8 m 55.8 m 55.8 m
Weight — 95,175 mt 95,360 mt 95,780 mt
Cargo:
Cargo Units — 268 SCU 268 SCU 268 SCU
Cargo Capacity — 13,400 mt 13,400 mt 13,400 mt
Landing Capacity — None None None
Equipment Date:
Control Computer Type — M-1 M-2 M-2
Transporters:
Standard 6-person — 4 4 4
Emergency 22-person — 2 2 2
Cargo — 2 2 2
Other Data:
Crew — 300 300 300
Passengers — 22 22 22
Shuttlecraft — 6 6 6
Engines And Power Data:
Total Power Units Available — 26 26 28
Movement Point Ratio — 2/1 2/1 2/1
Warp Engine Type — FWC-2 FWC-2 FWC-2
Number — 1 1 1
Power Units Available — 20 20 20
Stress Charts — M/K M/K M/K
Max Safe Cruising Speed — Warp 7 Warp 7 Warp 7
Emergency Speed — Warp 9 Warp 9 Warp 9
Impulse Engine Type — FIC-3 FIC-3 FIE-2
Power Units Available — 6 6 8
Weapons And Firing Data:
Beam Weapon Type — FL-6 FH-5 FH-3
Number — 2 2 2
Firing Arcs — 2 p/f/s 2 p/f/s 2 p/f/s
Firing Chart — H R W
Maximum Power — 3 4 5
Damage Modifiers:
+3 (-) (-) (1-10)
+2 (1-4) (1-8) (11-17)
+1 (5-7) (9-16) (18-20)
Shield Data:
Deflector Shield Type — FSC FSH FSK
Shield Point Ratio — 1/1 1/2 1/2
Maximum Shield Power — 8 13 16
Combat Efficiency:
D — 58.1 82.6 91.6
WDF — 2.8 6.6 11.6

Design Notes: The Anubis was drawn by Jim Botaitis, including incredible deck plans. Jim’s deck plans are on par with some of the best material out there. For more information on this design, visit Jim’s JBOT website. Well worth the trip!

There was a bit of a conflict with the naming convention as Eric Kristiansen’s Jackill’s drawings also mention a scout with a similar name. Fortunately, Eric denotes his as the Anubus, eliminating the conflict.